Cole-Parmer® SamplePrep XP-400 X-Press® XRF Pellet Press

Cole-Parmer® SamplePrep XP-400 X-Press® XRF Pellet Press Part Number: 3636 The XP-400 X-Press® is a 35-ton (31.8 metric ton) hydraulic laboratory pellet press that accepts 13 mm, 31 mm, 35 mm, and 40 mm pellet die sets. Automatic and fully programmable, this X-Press® is designed for repetitive pressing of sample pellets for XRF, IR, and other analytical techniques. Typical applications include: pressed pellets for XRF/XRD and IR. Typical samples include: cement, rocks, minerals, soil, ceramics, and pharmaceuticals. Accepts all Cole-Parmer® SamplePrep evacuable pellet die sets. Can be operated anywhere in the world, even under the most primitive conditions. Economical alternative to motorized presses for labs within a small sample load. Hardened steel buffer plate is engraved with concentric circles and enables easy centering of the die. Manual, hydraulic laboratory press with buffer plate. Rugged, reliable and noted for its extraordinary durability. Upper platen is equipped with a safety shield for operator protection. The XP-400 X-Press is an automated laboratory press intended for pressing sample pellets for spectroscopy. The press is programmable, so that repetitive pellet preparations may be carried out with a minimum of operator workload and a maximum of uniformity. The X-Press can also be operated manually. Accepts all Cole-Parmer® SamplePrep evacuable pellet die sets. Can be operated anywhere in the world, even under the most primitive conditions. Economical alternative to motorized presses for labs within a small sample load. Hardened steel buffer plate is engraved with concentric circles and enables easy centering of the die. Manual, hydraulic laboratory press with buffer plate. Rugged, reliable and noted for its extraordinary durability. Upper platen is equipped with a safety shield for operator protection. The XP-400 X-Press is an automated laboratory press intended for pressing sample pellets for spectroscopy. The press is programmable, so that repetitive pellet preparations may be carried out with a minimum of operator workload and a maximum of uniformity. The X-Press can also be operated manually. Model Number XP-400 Type of Mill Automated, hydraulic Force 0 to 35 tons ram pressure Dwell Time 0 to 10 minutes Release Time 15 seconds to 10 minutes Platen Size 8 cm (3.2 in.) diameter Platen Movement 25 mm (1 in.) Daylight 5 to 15 cm (2 to 6 in.) Screw Adjustment 9 cm (3.5 in.) Motor 1/3 HP Power 800 VA Voltage 115 V/60 Hz or 230 V/50 Hz Dimensions (H x W x D) 50.8 x 33.0 x 57.2 cm (20.0 x 13.2 x 22.5 in.) Net Weight approximately 65.8 kg (145 lb) CE Approved Yes 50.8 x 33.0 x 57.2 cm (20.0 x 13.2 x 22.5 in.)