Vapor Pressure of Crude Oil & Petroleum Products

Conforms to ASTM D5188, D5191, D6377, D6378 and related specification Integrated sample shaker with locking mechanism Outputs LIMS, network/ticket/full-page printer, and USB A & B Storage capacity for more than 50,000 analysis Fully automatic sample introduction via internal piston and valving; for use with siphon tube, syringe, or pressurized cylinder Conforms to ASTM D5188, D5191, D6377, D6378 and related specification Integrated sample shaker with locking mechanism Outputs LIMS, network/ticket/full-page printer, and USB A & B Storage capacity for more than 50,000 analysis Fully automatic sample introduction via internal piston and valving; for use with siphon tube, syringe, or pressurized cylinder Benchtop vapor pressure analysis for crude oil, gasoline, jet fuel, and solvents with one-button operation. Sample is injected into a nickel-plated aluminum chamber, cooled or heated via a Peltier thermoelectric device. A high-resolution pressure transducer continuously monitors and compensates for variations over a 0-1000 kPa range. The system is managed by an integrated touchscreen that guarantees fast response to user input, even when operating with heavy PPE gloves. Conforms to the specifications of: ASTM D5188, D5191, D6377, D6378; EN 13016-1, EN 13016-2; GB/T 8017; IP394, IP409; JIS K2258-2, SH/T 0769, SH/T 0794, Excellent correlation to: ASTM D323 (wet Reid), D4953 (dry Reid) Application fuel specification: ASTM D910, D1655, D4814, D6227; EN 228; CARB 13CCR 2297 Measurement Time: 5 minutes for standard methods Temperature Range: 0 to 100°C (32 to 212°F) Temperature Stability: ± 0.01 °C (0.02 °F) Pressure Range: 0 to 1000 kPa (0-145 psi) Pressure Resolution 0.01 kPa (0.0014 psi) Sample Volume ≤ 1 mL (2.5 mL per rinse cycle) Vapor/Liquid Ratio: 0.2:1 to 100:1, User-adjustable Interfaces: USB, RS232, Ethernet Conforms to the specifications of: ASTM D5188, D5191, D6377, D6378; EN 13016-1, EN 13016-2; GB/T 8017; IP394, IP409; JIS K2258-2, SH/T 0769, SH/T 0794, Excellent correlation to: ASTM D323 (wet Reid), D4953 (dry Reid) Application fuel specification: ASTM D910, D1655, D4814, D6227; EN 228; CARB 13CCR 2297 Measurement Time: 5 minutes for standard methods Temperature Range: 0 to 100°C (32 to 212°F) Temperature Stability: ± 0.01 °C (0.02 °F) Pressure Range: 0 to 1000 kPa (0-145 psi) Pressure Resolution 0.01 kPa (0.0014 psi) Sample Volume ≤ 1 mL (2.5 mL per rinse cycle) Vapor/Liquid Ratio: 0.2:1 to 100:1, User-adjustable