Broadband 75 ohm Distribution Amplifier - FS730

Flat frequency response to 100 MHz High current compliance FS735 Distribution Amplifiers The FS730/5 Series Distribution Amplifiers are used to distribute broadband (DC to 100 MHz) analog signals over 75 Ω coax. Each amplifier has one input and seven outputs, all on BNC connectors. The input and outputs are DC coupled with a 75 Ω impedance. Applications include the distribution of frequency references, IRIG timing signals, composite video, audio, etc. FS735 Distribution Amplifier FS730 Distribution Amplifier FS735 3D Step File FS730 3D Step File FS735 Volatility Statement FS740 GPS Frequency Std. PRS10 Rb Oscillator FS752 GPS System FS725 Rb Freq. Std. FS740 GPS Freq. Std. PRS10 Rb clock FS735 Distr. Amp. SG380 RF Sig. Gen. FS730 & FS735 Broadband 75 Ω Distribution Amplifiers FS730 & FS735 Broadband, 75 Ω Distribution Amps Additive Phase Noise X Additive Phase Noise FS730 & FS735 Additive Phase Noise The FS730/5 Series Distribution Amplifiers are used to distribute broadband (DC-100 MHz) analog signals over 75 Ω coax. Each amplifier has one input and seven outputs, all on BNC connectors. The input and outputs are DC coupled with a 75 Ω impedance. Applications include the distribution of frequency references, IRIG timing signals, composite video, audio, etc. The FS73x series of products can be configured as half-width, 1U, benchtop instruments (FS730) shown above, or in full-width, 1U, 19" rack-mount enclosures (FS735) shown below. The FS730/5 model provides 7 output BNC connectors on the front panel, and can be rack mounted with an optional rack mount kit. Small Signal Response X Small Signal Response FS730 & FS735 Small Signal Response There are four indicator LEDs. The “power” LED indicates that the unit has AC power. The “signal” LED indicates that an input signal greater that 300 mV is present. The “overload” LED indicates that the input signal has exceeded ±2 V. The FS735/5/5 model provides 14 output BNC connectors on the rear panel, with status indicators on the front panel. Several types of distribution amplifiers are available as listed below. Different types may be combined within the FS735 chassis. Option 1 — 10 MHz distribution amplifier Option 2 — 5 MHz distribution amplifier Option 3 — CMOS logic distribution amplifier Option 4 — Broadband 50 Ω distribution amplifier Option 5 — Broadband 75 Ω distribution amplifier Large Signal Response X Large Signal Response FS730 & FS735 Large Signal Response FS730/735 Specifications Performance (75 Ω loads) Phase noise (10 MHz, +7 dBm input) Noise (dBc/Hz, typ.) 10 W, 100/120/220/240 VAC, 50/60 Hz Dimensions FS730 FS735 8.3" × 1.5" × 8.0" (WHL) 17" × 1.5" × 8.0" (WHL) One year parts and labor on defects in materials and workmanship