SIM918 - Precision Current Preamplifier

Input offset voltage <10 µV DC bias current <2 pA Current gain of 10 6 to 10 8 V/A 15 fA/√Hz input noise (10 8 V/A) SIM918 Current Preamplifier The SIM918 Current Preamplifier is ideal in applications in which the input offset voltage must be kept to a minimum. The DC voltage difference between the two inputs (current input and voltage bias) is accurately measured every 2 seconds, and is nulled. The result is a current amplifier with less than 10 µV input offset voltage. This autozeroing feature can be engaged or inhibited remotely or from the front panel, giving you flexibility in sensitive applications. Programming Examples SIM Modules Scientific Instruments SRS Preamplifiers SIM Modules Sci. Instruments SRS Preamplifiers As a current amplifier, the SIM918 offers input noise as low as 15 fA/√Hz and adjustable current gain (10 6 to 10 8 V/A) . The output voltage range is ±10 V for all gain settings. Input bias current is less than 2 pA (DC) , and the instrument has up to 22 kHz of (gain-dependent) bandwidth . There is a voltage bias input for setting the virtual ground potential to an external DC source. This input can range over ±5 V. The bias voltage can be internally grounded. An autozero sync input/output connection is also provided. In the internal autozeroing mode, this port provides a one pulse-per-second (pps) output synchronous with the internal switching circuitry. In the external mode, a 0.9 to 1.1 pps input signal generates the reference for synchronizing the circuitry. The SIM918 provides maximum flexibility for cabling and grounding. The shield of the current input BNC can be switched between chassis ground, the bias voltage, or the rear-panel Program input (which can be left floating, if desired). With the Program input, a user can supply an excitation potential to an experiment via the shield conductor of the input cable, while the excited current flows through the center conductor to the SIM918. The shield of the voltage bias BNC can be independently grounded or floated. SIM918 Specifications Input offset voltage <10 µV (autozero enabled) 10 6 V/A, 10 7 V/A or 10 8 V/A 3.5 pA rms (w/ autozero engaged) Can be tied to chassis ground, set to the rear-panel analog input (Prog), or driven from the bias input. Program Input (rear panel) Connects to current input BNC shield when selected Int. switching freq. 1 pulse per second (pps), TTL level. Functions as a 1 pps sync output in internal mode. Operating temperature 0 °C to 40 °C, non-condensing Serial via SIM interface BNC (3 front, 2 rear) Power supplied by the SIM900 Mainframe, or optionally by a user-supplied DC power supply (±15 V and +5 V). 1.5" × 3.6" × 7.0" (WHL) One year parts and labor on defects in materials and workmanship