LKV4000 Refrigerated Kinematic Viscosity Bath

Kinematic viscosity is of primary importance in the design and selection of a wide range of petroleum products. Calibrated capillary viscometers are used to measure flow under gravity or vacuum at precisely controlled temperatures. Improved design with enhanced performance and safety features Temperature range from 15 °C to -70 °C ( 59 °F to 94 °F) Microprocessor PID temperature control with two decimal calibration offset Dual digital displays show setpoint and actual bath temperature Selectable temperature scale - Fahrenheit or Celsius Conforms to ASTM D445 and related specifications Refrigerated constant temperature bath with improvements in operating features, safety and cabinetry. Advanced temperature control circuitry includes microprocessor PID design and two decimal calibration offset. Simple pushbutton controls and dual digital displays permit easy setting and monitoring of bath temperature. The bath accommodates four glass capillary viscometers using 2" (51mm) round holders (rectangular ports are available on special order). The bath medium is contained in a clear, evacuated Dewar flask and glare-free fluorescent backlighting provides excellent visibility when working with the viscometers. The insulated steel cabinet has an attractive polyester-epoxy finish and is mounted on adjustable leveling feet. Chemical resistant working (top) surface has four round ports for 2" (51mm) viscometer holders and one port for a thermometer holder. The front viewing window provides clear, distortion-free visibility. The microprocessor controller incorporates circuitry that interrupts power to the heater in the event of an over-temperature condition or disconnection of the primary probe. A redundant adjustable controller and sensor probe provide added over-temperature protection, and an integrated low liquid level sensor cuts power to the heaters if the bath liquid is not filled to the proper level or falls below during operation. Both over-temperature and low liquid level circuits will latch and prevent further operation of the bath until the fault is removed. The LKV4000 model operates at temperatures from ambient to -70 °C (-94 °F), exceeding ASTM temperature control accuracy and uniformity requirements throughout the operating range. Air-cooled hermetic compressors provide efficient operation with the use of CFC-free refrigerants. Port Cover, Delrin® (4) Thermometer Holder Conforms to the specifications of: ASTM D445, D2170, D6074, D6158; IP 71, 319; ISO 3104; DIN 51550; FTM 791-305; NF T 60-100 Testing Capacity: Four (4) glass capillary viscometers Viscometer Ports: Four (4) round 2" (51 mm) ports Bath Dimensions: 9 ½" dia. x 12" depth (24 cm dia. x 30 cm) Bath Capacity: 3.7 gal (14 L) Temperature Control Display: 0.1 °C / 0.1 °F resolution, calibrate to 0.01 °C / 0.01 °F