LPG Copper Strip Corrosion Test Apparatus

Tests the corrosiveness of LPG to copper by immersion of a polished test strip in the sample inside a test cylinder at elevated temperature. After one hour the test strip is removed and compared against the ASTM Copper Strip Corrosion Standards. Conforms to ASTM D1838 and related specifications Capacity for 5 samples Consists of LPG Corrosion Test Cylinders, Water Bath, Copper Strips, Polishing Materials, and the ASTM Copper Strip Corrosion Test Standards Temperature-controlled water bath submerges five LPG Corrosion Test Cylinders in an upright position. Controls temperature at 100 ± 1°F (37.8 ± 0.5°C) per ASTM specifications. Polished stainless steel inner wall and powder coated steel outer wall construction. Fully insulated. Stainless steel cylinder with 1⁄4” needle valves for purging and admitting LPG samples. Dip tube with hook suspends copper strip in sample. Knurled, threaded cap with O-ring gasket hand tightens to a positive seal. Withstands hydrostatic test pressure of 1000 psig (6895 kPa). Conforms to the Specifications of: ASTM D1838; GPA 2140; ISO 6251 Capacity: 5 LPG Corrosion Test Cylinders Temperature: Range: Ambient to 100°F (37.8°C) Control Stability: Exceeds ASTM Requirements Bath Medium: 6.1 gal (23.1 L) water K64800: 115V 60Hz, Single Phase, 10A K64890: 220-240V 50/60Hz, Single Phase, 5A K40000 LPG Corrosion Test Cylinder